Maintenance & Commissioning Engineer Jobs

Spread the love

We are recruiting for the role below:

  1. Commissioning and Start Up Superintendent
  2. Spares and Materials Management/ Coordinator
  3. Commissioning and Start Up DCS Panel Supervisor
  4. Maintenance Supervisor – Electrical
  5. Maintenance Supervisor – Mechanical
  6. Maintenance Supervisor – Instrument
  7. Plant Activity & PTW Surveillance Supervisor
  8. Principal Technical Writer
  9. Commissioning and Start Up Shift Supervisor
  • COMMISSIONING AND START UP SHIFT SUPERVISOR (Nigerians Only)

Job Description
• Coordinate the Shift teams in the daily commissioning and start up activities to ensure that safe working conditions are maintained at all times and work progress are maintained as per project schedule.
• Coordinate the team in the regular walk down of process/utility lines, installation, tie-in etc. to ensure that plant is built as per design, to the right quality and to ensure operability.
• Act as a signatory (at Shift Supervisor/AGSI (Authorized Gas Safety Inspector) level) to the Commissioning and Start up Permit to Work (PTW) system, authorize Permit to Work (PTW) to the Maintenance/Contractors team for effective control, authorization and safe work execution. Oversight of CSU (Commissioning & Start-Up) Permit to Work (PTW) system and signatory for high-risk permits and activities (major energizations, large equipment testing, high pressure testing, etc.)
• Coordinate project execution/tie-in in the Brownfield environment to ensure that plant projects are implemented as per design, properly commissioned with as built document draft available in the shift without any information gap within the shift with regard to the new change.
• Primary signatory for completions and P2A (Project to Asset) activities (handover of Care Custody and Control for systems & areas, post start-up operations testing)
Requirement:
• HND or Bachelor’s degree in chemical engineering or other engineering/science discipline
• Minimum of 15 years working experience in LNG Plant Operations with at least 10 years’ experience in Plant
• Experience in providing CSU (Commissioning & Start-Up) related design input and working in an EPC (Engineering, Procurement, And Construction) or a plant environment considered an advantage
• Working experience on part of, or the entire, ORP (Operations Reference Plan) Project life cycle (from conceptual design through to final commissioning and handover) and/or in the front-line Oil and Gas production operations is desirable

  • PRINCIPAL TECHNICAL WRITER (Nigerians Only)

Job Description
• Plan, develop, organize, write and edit high-quality operational procedures and manuals using the design data and Vendor information in a clear and concise manner to ensure safe and efficient activities execution
• Oversee peer editing and production review work. Coordinate team’s effort in the development and review of Commissioning and Start up Procedure by the Operations team.
• Research, develop and document technical design specifications and test scripts. Produce electronic documentation in addition to hard copy manuals and maintain a comprehensive library of technical terminology and documentation
• Write, format, edit, review, and proof procedural and technical information for technical and nontechnical users
Requirement:
• HND or Bachelor’s degree in chemical engineering or other engineering/science discipline.
• Minimum of 20 years oil & gas plant operations experience preferably in the LNG industry with at least 10 years at supervisory level as a Technical Writer or similar role in a complex LNG Plant Project
• Experience working with P&IDs, Isometrics, and Control Drawings for LNG Plant design, construction, commissioning and start up
• CSU (Commissioning & Start-Up) related design input and working in an EPC (Engineering, Procurement, And Construction) or a plant environment considered an advantage
• Working experience on part of, or the entire, ORP (Operations Reference Plan) Project life cycle (from conceptual design through to final commissioning and handover) and/or in the front-line Oil and Gas production operations is desirable

  • PLANT ACTIVITY & PTW SURVEILLANCE SUPERVISOR (Nigerians Only)

Job Description
• Lead the Operators in providing safe working condition, process and environment to ensure that the daily activities (construction, commissioning and start up) are carried out in a safe and as per the permit to work procedures and guidelines at all times.
• Monitor compliance to the “Permit to Work” requirements and intervene when any unsafe (potentially unsafe) condition or practice is observed – be proactive in identifying/observing any potentially unsafe situations and conditions. Escalate as required.
• Lead the team (Principal/Senior Operators, Operators) in the regular walk down of process/utility lines, installation, tie- in etc. to ensure that plant is built as per design (as per PEFS – Process/Utility Engineering Flow Scheme), to the right quality and to ensure operability.
• Supervise project execution/tie-in in the Brownfield environment to ensure that plant projects are implemented as per design, properly commissioned with as-built document drafts available in the shift without any information gap within the shift with regards to the new change.
Requirement:
• HND or equivalent in chemical engineering or other engineering/science discipline.
• Minimum of 15+ years oil & gas plant operations experience preferably in LNG industry with at least 5 years at supervisory level
• Experience in Integrated Safe System of Work, Management of Change process, Operations Integrity /Process Safety management processes
• Working experience on part of, or the entire, ORP (Operations Reference Plan) Project life cycle (from conceptual design through to final commissioning and handover) and/or in the front-line Oil and Gas production operations is desirable

MAINTENANCE SUPERVISOR – MECHANICAL (Nigerians Only)

Job Description
• Accountable for Mechanical aspect of detailed planning (L3/4) of Computerized Maintenance Management System (CMMS) build scope), KPI’s (Key Performance Indicator) and progress measurement indicators. The CMMS (computerized maintenance management system) scope includes; SAP-PM, Spares and BOM in SAP-MM, Inspection/Corrosion management in S-IMS and quality interface with supporting systems including s-RBI, s- RCM, w-SIFPRO, AVEVA, SAPDMS/SharePoint, etc.
• Supervisor of Mechanical discipline aspect of the project’s MRTA (Maintenance & Reliability Improvement and Turnaround) within ORCSU (Operations Readiness, Commissioning and Startup) team. Participate in all Maintenance Assurance-related reviews like Operability & Maintainability Workshop, Reliability Centered Maintenance Workshop etc
• Assist the Service contract holder for CMMS (Computerized Maintenance Management System) build services (TA CTR and CMMS (Computerized Maintenance Management System) contractor call-off contract).
– Accountable for the Mechanical related project MRTA (Maintenance & Reliability Improvement and Turnaround) deliverables.
Requirement:

  • Minimum BSc. Degree or HND in a Mechanical Engineering Discipline
  • 10+ years’ experience in MRTA (Maintenance & Reliability Improvement and Turnaround) in the Oil and Gas industry, at least 2 of which will have been in a major project environment.
    – Solid technical knowledge of maintenance management with MIE (Maintenance & Integrity Execution) best practices and a hands-on approach to implementing planning and scheduling activities as part of coaching maintenance staff

MAINTENANCE SUPERVISOR – INSTRUMENT (Nigerians Only)

Job Description

  • Accountable for Instrument aspect of detailed planning (L3/4) of Computerized Maintenance Management System (CMMS) build scope), KPI’s (Key Performance Indicator) and progress measurement indicators. The CMMS (Computerized Maintenance Management System) scope includes; SAP-PM, Spares and BOM in SAP-MM, Inspection/Corrosion management in S-IMS and quality interface with supporting systems including s-RBI, s- RCM, w-SIFPRO, AVEVA, SAPDMS/ SharePoint, etc
  • Supervisor of Instrument discipline aspect of the project’s MRTA (Maintenance & Reliability Improvement and Turnaround) within ORCSU (Operations Readiness, Commissioning and Start-up) team.
  • Participate in all Maintenance Assurance-related reviews like Operability & Maintainability Workshop, Reliability Centered Maintenance Workshop etc.
  • Assist the Service contract holder for CMMS (Computerized Maintenance Management System) build services (TA CTR and CMMS contractor call-off contract).
    Requirement:
  • Minimum BSc. Degree or HND in an Instrument Engineering Discipline
  • 10+ years’ experience in MRTA (Maintenance & Reliability Improvement and Turnaround) in the Oil and Gas industry, at least 2 of which will have been in a major project environment.
    – Previous role will require experience in a similar role in major project delivery or asset involving complex processing, new technologies, change management/ business improvement.
    • Solid technical knowledge of maintenance management with MIE (Maintenance & Integrity Execution) best practices and a hands-on approach to implementing planning and scheduling activities as part of coaching maintenance staff

MAINTENANCE SUPERVISOR – ELECTRICAL (Nigerians Only)

Job Description

  • Accountable for Electrical aspect of detailed planning (L3/4) of Computerized Maintenance Management System (CMMS) build scope of project), KPI’s (Key Performance Indicator) and progress measurement indicators. The CMMS (Computerized Maintenance Management System) scope includes; SAP-PM, Spares and BOM in SAP-MM, Inspection/Corrosion management in S-IMS and quality interface with supporting systems including s-RBI, s- RCM, wSIFPRO, AVEVA, SAPDMS/ SharePoint, etc.
  • Supervisor of Electrical discipline aspect of the project’s MRTA (Maintenance & Reliability Improvement and Turnaround) within ORCSU (Operations Readiness, Commissioning and Start-up) team.
  • Participate in all Maintenance Assurance-related reviews like Operability & Maintainability Workshop, Reliability Centered Maintenance Workshop etc.
  • Assist the Service contract holder for CMMS build services (TA CTR and CMMS contractor call-off contract)
    Requirement:
  • Minimum BSc. Degree or HND in Electrical Engineering Discipline
  • 10+ years’ experience in MRTA (Maintenance & Reliability Improvement and Turnaround) in the Oil and Gas industry, at least 2 of which will have been in a major project environment.
    – Extensive field experience in managing Maintenance systems setup and delivery in project or in an asset organization
  • Solid technical knowledge of maintenance management with MIE (Maintenance & Integrity Execution) best practices and a hands-on approach to implementing planning and scheduling activities as part of coaching maintenance staff

SPARES AND MATERIALS MANAGEMENT/ COORDINATOR (Nigerians Only)

Job Description

  • Provide onboarding as guidance to CONTRACTOR who will ensure that ITT (Invitation to Tender), Pos (Purchase Order, contracts and project specifications include a spare Parts Identification Process and that specification of BoM’s are stipulated.
  • Ensure receipt and entry of all material master data in the ERP (Enterprise Resource Planning Software) and ensure SAP data refreshes throughout the project phase.
  • Own and ensure compliance with the Spare Parts Strategy for the Project and ensure proper action will be taken on surplus materials and spare parts with Maintenance and Contracting and Procurement.
  • Coordinate the inclusion of parts from the E-SPIR (Electronic Spare Parts List and Interchangeability Record) on the Bill of Material in the ERP (Enterprise Resource Planning Software) and work with IT to ensure the deployment of the E-SPIR (Electronic Spare Parts List And Interchangeability Record) Advisor, set up and assign roles.
    Requirement:
  • Minimum BSc. Degree or HND in Engineering or Science Discipline
  • Background in materials and maintenance coupled with knowledge of Capital Projects Information Management
    – Spare parts rationalization and E-SPIR (Electronic Spare Parts List and Interchangeability Record), data control processes and systems.
  • CMMS (Computerized Maintenance Management System) builds, Bills of Material, Material Master and Maintenance.

COMMISSIONING AND START UP DCS PANEL SUPERVISOR (Nigerians Only)

Job Description

  • Carry out daily commissioning and start up activities in the Control room, including loop testing in conjunction with outside Operators and contractor personnel
  • Take part in the Initial Set Up (ISU) of variable Tables as part of the multidisciplinary Asset Management 2.2.4 ENSURE SAFE PRODUCTION module. Take part in the OTS (Operator Training Simulator) development including static model testing, dynamic testing, FAT, SAT etc.
  • Safely Operate the Distributed Control System as per daily instructions and at its optimum point. Proactively monitor the DCS as per ESP standards specified in the Alarm Variable Tables (VTs)
  • Safely Operate the Distributed Control System as per daily instructions and at its optimum point. Proactively monitor the DCS as per ESP standards specified in the Alarm Variable Tables (VTs)
    Requirement:
  • HND or equivalent in chemical engineering or other engineering/science discipline.
  • Minimum of 10 years oil & gas plant operations experience preferably in LNG industry
    – Experience in providing CSU (Commissioning & Start-Up) related design input and working in an EPC (Engineering, Procurement, And Construction) a plant environment considered an advantage
  • Working experience on part of, or the entire, ORP (Operations Reference Plan) Project life cycle (from conceptual design through to final commissioning and handover) and/or in the front-line Oil and Gas production operations is desirable

COMMISSIONING AND START UP SUPERINTENDENT (Nigerians Only)

Job Description

  • Coordinate the Shift teams in the daily commissioning and start up activities to ensure that safe working conditions are maintained at all times and work progress are maintained as per project schedule.
  • Coordinate the team in the regular walk down of process/utility lines, installation, tie-in etc. to ensure that plant is built as per design, to the right quality and to ensure operability.
  • Act as a signatory {at Shift Supervisor/AGSI (Authorized Gas Safety Inspector) level} to the Commissioning and Start up Permit to Work (PTW) system, authorize Permit to Work (PTW) to the Maintenance/Contractors team for effective control, authorization and safe work execution. Oversight of CSU (Commissioning & Start-Up) Permit to Work (PTW) system and signatory for high-risk permits and activities (major energizations, large equipment testing, high pressure testing, etc.)
  • Assist in the development of the commissioning, start up and shutdown plans and their execution as assigned by the Commissioning Shift Superintendent for effectiveness in plan implementation
    Requirement:
  • HND or Bachelor’s degree in chemical engineering or other engineering/science discipline.
  • Minimum of 20 years oil & gas plant operations experience preferably in the LNG industry with at least 10 years at supervisory level
  •  Experience in providing CSU (Commissioning & Start-Up) related design input and working in an EPC (Engineering, Procurement, And Construction) or a plant environment considered an advantage
  • Working experience on part of, or the entire, ORP (Operations Reference Plan) Project life cycle (from conceptual design through to final commissioning and handover) and/or in the front-line Oil and Gas production operations is desirable

Please Email your CV to: recruitment.nigeria@amaiden.com
Deadline: 14 February, 2022

Leave a Reply

Your email address will not be published.

Back to top button
error: Content is protected !!